Click here to learn more about taking advantage of Jordan Express on your next order.

  

Steam | Boiler Feed Water | Pressure Reducing | Back Pressure Reducing | Control Valves | Sanitary Valves | Air/Oil/Gas Utilities
 


STEAM APPLICATIONS

Mark 33 Series – Boiler Feedwater Control Valve
The Mark 33 is a motor-operated valve featuring the Jordan sliding gate seat and heavy-duty industrial motor for proportional (resistance), on-off, 4-20 mA electronic control. The Mark 33 delivers exceptional pressure drop abilities and greater utilization of the motor torque output.
Mark 37 Series - Motor Operated Control Valve
The Mark 37 is a motor-operated control valve that combines a state-of-the-art electronic linear actuator with the exceptional performance of Jordan's sliding gate valve seat design. It’s superior accuracy makes the Mark 37 an ideal final control element in distributed process control systems.
Mark 50/501/502/51 Series – Self-Operated Back Pressure Regulator
The Mark 50 Sliding Gate Back Pressure Regulator is used to regulate upstream pressure at a predetermined setpoint.
Mark 52 Series – Internally Piloted Regulator
The Mark 52 internally piloted, back-pressure regulator is a specialty valve designed for critical application regulation in locations where space is limited.
Mark 53/54 Series – Differential Back Pressure

The Mark 53 maintains a constant differential between the inlet pressure and the pressure loaded on top of the diaphragm. It can be used for both differential and remotely adjusted applications.

Mark 55 Series - Vacuum Service Regulator
Jordan vacuum back pressure regulators control very accurately and shutoff tightly to maintain the proper vacuum setting. They are used to maintain vacuums at predetermined settings and to regulate vacuum on evaporators, cookers, grinding fixtures, milking machines, altitude chambers and other vacuum systems.
Mark 56 Series – Air Loaded Back Pressure Regulator

The Mark 56 is a highly accurate and economical air loaded back-pressure regulator that provides regulation from a local or remote station. The operation of the Mark 56 requires no control spring or pilot.

Mark 57 Series – Externally Piloted Regulator

The Mark 57 pilot-operated, back pressure regulator is designed to accurately control pressure to 100% of its rated flow capacity with only a small deviation from the setpoint.

Mark 58 Series – Globe Style Back Pressure Regulator

The Mark 58 back pressure regulator features three ports: a bypass outlet on the bottom and two side ports which are directly connected to serve as dual inlets or as inlet and outlet for flow-through.

Mark 60/601/602/61 Series - Sliding Gate Pressure Regulator

The Mark 60 Sliding Gate Pressure Regulator regulates the downstream pressure to a predetermined set point.

Mark 62 Series - Internally Piloted Regulator

The Mark 62 internally piloted pressure regulator is a specialty valve designed for critical application regulation in locations where space is limited.

Mark 63/64 Series – Differential Regulator

The Mark 63 is designed to maintain a constant differential between the pressure on the discharge side of the regulator and the signal pressure loaded on the diaphragm. The Mark 64 provides the same flow capacity as the Mark 63, but with less offset in controlled pressure due to a larger diaphragm.

Mark 65 Series - Vacuum Service Regulator

Jordan vacuum regulators control accurately and shutoff tightly to maintain the proper vacuum setting.

Mark 66 Series – Air Loaded Pressure Regulator

The Mark 66 is a highly accurate and economical air-loaded pressure regulator that provides regulation from a local or remote station. The operation of the Mark 66 requires no control spring or pilot.

Mark 67 Series – Piloted Sliding Gate Regulator

The Mark 67 Series is for critical pressure reducing applications. It provides greater accuracy and lower offset than can be achieved with a self-operated regulator.

Mark 68G Series – Globe Style Regulator

The Mark 68G is a self-operated globe style pressure reducing regulating valve. It offers high capacity, accurate regulation and easy servicing, making it an ideal choice for industrial pressure reducing applications.

Mark 68HP Series – High Pressure Regulator

The Mark 68HP is designed primarily for high pressure steam service commonly found in power plants, refineries, pulp & paper mills and other high pressure process applications.

Mark 70/701/702/711/707 Series – Sliding Gate Control Valve

The Mark 70 Series is a line of pneumatically-operated, diaphragm control valves that combine multiple spring actuators with the precision of sliding gate seat for closer control and greater accuracy.

Mark 75 Series – Wafer Style Control Valve

The Mark 75 has all the benefits of the sliding gate seat design, coupled with the lightweight, compact wafer style body.

Mark 76 Series – High Cycle, On/Off Valve

The Mark 76 (1/2" - 2") typically functions using a 0 psi or 20 psi control signal. Through the use of a solenoid, either 0 psi or 20 psi is supplied to the actuator. Depending on the configuration of the sliding gate seats, 20 psi will either open or close the valve.

Mark 78 Series – Globe Style Control Valve

The Mark 78 pneumatic control valve is designed for accurate performance and simplified maintenance. It can be used on a variety of applications including viscous/corrosive liquids, process gases or utility steam in process or utility service.

Mark 79/79MX Series – 3 Way Mixing/Diverting Valve

The Mark 79 is an air-operated control valve used for diverting service; ideal for bypassing fluids around coolers or filters. It can also be used as a combining or mixing valve with two inlets and one outlet.

V1C Series – Cage Guided Heavy Duty Valve

The Mark V1C cage-guided, balanced trim control valve offers high pressure and tight shutoff with standard spring/diaphragm actuators. The balanced cage trim design enables this valve to handle differential pressures up to 1480 psi (102 bar) through the 6" (DN150) size.