RITEC offers a full line of Steriflow Valves to meet your Industrial and Process needs. Browse the categories below to view the products available!

 

 

 AcidBio/Parenteral | BufferCaustic | CIP Clean Condensate | Clean/Dry Gas/Air Clean Steam | Nutrient Solvent | USP PW | WFI

  

 


CLEAN CONDENSATE APPLICATIONS

Mark 90 Series Ball Valves
Sanitary ball valve designed with FDA-approved cavity filler seats and tri-clamp ends to minimize pockets where media can collect.ark 33 Series – Boiler Feedwater Control Valve
Mark 9020 Series - Ball Valves

The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE.

Mark 9030 Series - Three Way Ball Valves
Three-way sanitary ball valves designed from the beginning to meet every aspect of ASME BPE.ark 50/501/502/51 Series – Self-Operated Back Pressure Regulator.
Mark 95 Series Back Pressure Regulator
A sanitary back pressure regulator available with a hard or soft seat and a variety of diaphragm and o-ring materials, making the valve well-suited for virtually any sterile back pressure application.
Mark 95AA Series - Air Augmented Back Pressure Regulator
Sanitary air augmented back pressure regulator with the same line sizes, CV choices, seats, low build up characteristics, and stability of the standard bolted bonnet Mark 95.
MK95FT Series - Back Pressure Regulator
MK95FT is a sanitary "flow through" back pressure regulator. The MK95FT can eliminate a portion of the by-pass line components by allowing the back pressure regulating valve to be installed in the primary line.
Mark 96 Series - Pressure Regulator
Sanitary pressure regulator designed to regulate pressure in systems requiring the maintenance of sanitary conditions.
Mark 96A Series - Air Load Pressure Regulator
Air loaded sanitary pressure reducing valve design to permit the user to change set points remotely via a cabinet/panel mounted air regulator or even through a distributed control system and an I-P transducer.
Mark 96AA Series - Air Augmented Pressure Regulator
Sanitary air augmented pressure regulator with the same line sizes, Cv choices, seats, low droop characteristics and stability of the standard bolted bonnet Mark 96.ark 58 Series – Globe Style Back Pressure Regulator.
Mark 96C Series - Pressure Regulator
Clamped body sanitary pressure regulator designed to regulated downstream pressure of process and utility applications in sanitary and aseptic systems.ark 60/601/602/61 Series - Sliding Gate Pressure Regulator.
 
Mark 978JD Series - Control Valve
Designed to meet the rigid specifications for sterile process and clean utility control valves. This valve series is suitable for a wide variety of applications in the, bio-pharmaceutical, parenteral, cosmetic, dairy and food and beverage industries.
Mark 978LF - Low Flow Control Valve
Sanitary low flow control valve designed to meet the stringent specifications for low flow sterile process.
 
JSB Series - Bio-Pharma Gas Regulator
Built originally for clean gas back pressure applications, the JSB design is hygienic enough for liquid Buffer, and USP Purifed water back pressure applications.
JSR Series - Bio-Pharma Gas Regulator
Built originally for clean dry air and gas applications, the JSR design is hygienic enough (though not drainable) for USP Purifed water, Clean Steam and Condensate pressure regulator applications.
 
SC30 Series - Sample Coolers
The SC30 Sample Cooler is designed to facilitate sampling of clean steam and Water For Injection (WFI), while maintaining product sterility during testing.
 
SC50 Series - Sample Cooler
The SC50 Sample Cooler is designed to allow clean steam and Water For Injection (WFI) samples to be taken quickly, easily and safely while maintaining product sterility during testing.
 
SC60 Series - Sample Cooler
The SC60 Sample Cooler is designed to allow clean steam and Water For Injection (WFI) samples to be taken quickly, easily and safely while maintaining product sterility during testing. Constructed in 316L stainless steel, the SC60 is intended for permanent installation at the sampling point.
SG Series -Sight Glasses
In-line sight glasses are suitable for a wide range of ASME BPE applications in high purity tubing systems typically found in the pharmaceutical or bio-pharmaceutical industry.