RITEC offers a full line of Steriflow Valves to meet your Industrial and Process needs. Browse the categories below to view the products available!

 

 

 AcidBio/Parenteral | BufferCaustic | CIPClean Condensate | Clean/Dry Gas/Air Clean Steam | Nutrient | Solvent | USP PW | WFI

  

 


CLEAN (PURE) STEAM APPLICATIONS

Mark 90 Series Ball Valves
Sanitary ball valve designed with FDA-approved cavity filler seats and tri-clamp ends to minimize pockets where media can collect.ark 33 Series – Boiler Feedwater Control Valve
Mark 9020 Series - Ball Valves

The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE.

Mark 9020 ISO Series - Ball Valves
Mark 9020 ISO Series valve ends match DIN 11866 Part B (ISO 1127) tube.
Mark 93 Series - Steam Traps
A thermostatic steam trap designed specifically for use in clean steam systems demanding that sanitary conditions be maintained.
Mark 934 Series - Sanitary Steam Traps
Sanitary steam trap system specifically designed to facilitate the sterilization of sanitary vessels including fermentors, bioreactors and autoclaves without the addition of a SIP heat up bypass loop.
Mark 94 Series Steam Traps
Thermostatic steam trap designed specifically for use in high capacity clean steam systems where sanitary conditions must be maintained.
 
Mark 96 Series - Pressure Regulator
Sanitary pressure regulator designed to regulate pressure in systems requiring the maintenance of sanitary conditions.
Mark 96A Series - Air Load Pressure Regulator
Air loaded sanitary pressure reducing valve design to permit the user to change set points remotely via a cabinet/panel mounted air regulator or even through a distributed control system and an I-P transducer.
Mark 96AA Series - Air Augmented Pressure Regulator
Sanitary air augmented pressure regulator with the same line sizes, Cv choices, seats, low droop characteristics and stability of the standard bolted bonnet Mark 96.ark 58 Series – Globe Style Back Pressure Regulator.
Mark 96C Series - Pressure Regulator
Clamped body sanitary pressure regulator designed to regulated downstream pressure of process and utility applications in sanitary and aseptic systems.ark 60/601/602/61 Series - Sliding Gate Pressure Regulator.
JSRH Series - High Flow Clean Gas Pressure Regulator
The JSRH Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications.
 
Mark 978JD Series - Control Valve
Designed to meet the rigid specifications for sterile process and clean utility control valves. This valve series is suitable for a wide variety of applications in the, bio-pharmaceutical, parenteral, cosmetic, dairy and food and beverage industries.
Mark 978LF - Low Flow Control Valve
Sanitary low flow control valve designed to meet the stringent specifications for low flow sterile process.
 
Mark 978OR Series - Control Valve
O-ring series is designed to meet the rigid specifications for sanitary process control valves for customers who prefer an o-ring style stem seal. This valve is suitable for a wide variety of applications in the bio-pharmaceutical, pharmaceutical, cosmetic, dairy and food and beverage industries
CSDT Series - Steam Traps
A 316L polished stainless steel thermodynamic disc trap, that is compact with a lightweight design and tri-clamp end connections.
 
JSR Series - Bio-Pharma Gas Regulator
Built originally for clean dry air and gas applications, the JSR design is hygienic enough (though not drainable) for USP Purifed water, Clean Steam and Condensate pressure regulator applications.
 
JSRLF Series - Low Pressure Regulator
A line of low flow pressure regulator that have the ability to handle very high pressures and very lows. Most often used in bio-pharmaceutical and pharmaceutical research and production facilities for clean gas flow regulation.
SC30 Series - Sample Coolers
The SC30 Sample Cooler is designed to facilitate sampling of clean steam and Water For Injection (WFI), while maintaining product sterility during testing.
SC50 Series - Sample Cooler
The SC50 Sample Cooler is designed to allow clean steam and Water For Injection (WFI) samples to be taken quickly, easily and safely while maintaining product sterility during testing.
SC60 Series - Sample Cooler
The SC60 Sample Cooler is designed to allow clean steam and Water For Injection (WFI) samples to be taken quickly, easily and safely while maintaining product sterility during testing. Constructed in 316L stainless steel, the SC60 is intended for permanent installation at the sampling point.
SG Series -Sight Glasses
In-line sight glasses are suitable for a wide range of ASME BPE applications in high purity tubing systems typically found in the pharmaceutical or bio-pharmaceutical industry.
SSC Series- Sanitary Subcooled Condensers
Sanitary subcooled condenser is a patent pending sanitary condensate chamber and steam trap assembly that was designed to replace the 12-18” downcomber (drop leg) traditionally installed between SIP temperature sensors and sanitary steam traps.